wp06682e17.png

Descaling powder

 

 

Safety data sheet

 

Product name:  Scalgon Descaling Powder

Substance Name:  Sulphamidic Acid, Sulphamic Acid, Sulfamic Acid

Index-No.:  016-026-00-0

CAS-No.:  5329-14-6

EC-No.:  226-218-8

Registration Number:  01-2119488633-28-xxx

 

200g per sachet

 

pH:  1.2

 

Wear disposable gloves, and eye goggles.

 

Causes serious eye irritation.

Causes skin irritation.

Harmful to aquatic life with long lasting effects.

IF IN EYES:  Rinse cautiously with water for several minutes.  Remove contact lenses, if present and easy to do. Continue rinsing.  If eye irritation persists: Get medical advice/attention.

 

IF ON SKIN:  Wash with plenty of soap and water.

 

IF SWALLOWED:  Clean mouth with water and drink afterwards plenty of water.  Call a physician immediately.  Do not induce vomiting without medical advice.

 

Product is not flammable or explosive, but gives off hydrogen by reaction with metals, so risk of explosion.  Keep away from source of ignition – do not smoke.

 

For descaling of water heating equipment.

 

Safe to use on stainless steel.  Will affect brass, copper, and gold coatings.  Safe for use on chromium plating for short periods of time.  Not safe for use on galvanised finishes. If unsure, use with caution, or not at all. Always test on material surface before using.

 

Pack contains 200 grams of sulphamic acid – enough to produce ONE litre of a strong descaling solution when mixed with 1 litre of cool water.  It is possible to use more water than one litre for a weakened solution, but DO NOT use less than one litre of water per sachet as the powder will not fully dissolve.  Product dissolves easier in warm water, and heating aids the descaling process.

 

 

 

Contact Us:

0770 231 6157

We are Scalgon, and we are at 19 Cockney Hill, Reading. RG30 4HF

Email: info@scalgon.co.uk